LiLz

Fully Wireless IoT Camera, Thermography Type

LC-T10Series
Fully Wireless IoT Camera, Thermography Type LC-T10

Never Miss a Temperature Change

No Power or Network Work Required—Just Place the Camera to Record Temperature Distribution and Monitor Remotely Easly

LC-T10 Series 製品の特長

Monitor fixed points from ‑10 °C to 400 °C and digitize temperature changes in a specific area with ease

Install Without Any Power or Network Modification

Place It Anywhere Thanks to an Internal Battery and LTE Wireless Communication

A large‑capacity lithium‑ion battery and LTE let you deploy wherever mobile signals reach. With three shots per day it runs for about three years, and magnetic charging lets you top up without removing the camera.

Water‑ and Dust‑Proof for Outdoor Installation

With an IP65 sealed body and an infrared sensor, it keeps working in rain, dust, and darkness while detecting temperature changes.

Plenty of Mounting Attachments—Easy for Anyone to Install

Four 1/4‑inch screw mounts (back, sides, and bottom) accept standard clamps and tripods for versatile placement.

One‑Twentieth the Price of Conventional Units—Dramatically Lower Installation Cost

Intermittent measurement slashes power use, so no external power or networking is needed; the reasonable price further cuts costs.
*AC100V / LANケーブルなど工事が必要な製品

Check Equipment Status from Afar—Detect Anomalies with Periodic Measurements

Data Streams to the Cloud; Measurement Intervals Are Flexible from Every Ten Minutes to Scheduled Times

一度設定すると、何も操作する事なく定期的に計測を行います。一定の間隔で撮影する他、午前10時と午後8時のように時刻を指定することも可能です。またオンライン上から任意のタイミングで計測を指示することもできます。

Graph Measurement Results and Send Alerts Based on Thresholds

計測結果を過去のデータを含めて全て保存。過去のサーモグラフィ画像もいつでも閲覧できます。グラフ化もされるため、微細な変化を早期に発見できます。緊急度に応じて2段階に設定できる閾値があり、この閾値を超えた際、即座にメールで通知されます。

Add Any Number of Measurement Points Within a Single Thermographic Image—One Camera Covers Multiple Spots

一つのサーモグラフィ画像内で複数の計測箇所を指定することが可能です。各計測箇所のデータは個別に保存され、過去の情報との比較分析が行えます。アラートも各計測箇所ごとに設定できます。カメラの画角に広範囲を収めることで、複数の計測箇所を一台のカメラでカバーし、全体の導入台数を削減することが可能です。

クラウドシステム提供により
ウェブブラウザ上から簡単に設定

計測箇所の指定、アラートの設定、グラフの閲覧などはすべて普段お使いのブラウザから変更することが可能です。専用のソフトウェアを導入する必要はありません。

主な用途

発火予防から経年劣化、予知保全まで

発火予防

通常の目では見えない異常な熱源を識別し、火災につながるような機械や設備の過熱を早期に発見します。

  • 堆肥の自然発酵による火災検知
  • 石炭・コークスの貯蔵場所での発熱監視
  • 工業用ダクト内の異常発熱の監視
  • 無人発電設備の発火予兆検知

予知保全

機械や設備の微細な熱変化を検知し、故障や劣化の兆候を早期に発見し、突発的な機器の故障や停止を予防します。

  • 産業廃棄物のシュートつまり
  • ベルトコンベアの軸受け摩耗による火災

漏れ検知

ガスや液体の漏れが周囲の環境に与える微細な温度変化を検知することで、目視では発見が困難な漏れを早期に特定できます。

  • 蒸気配管トラップ
  • 高圧ガス漏れ検知
  • 天井の雨漏り監視

品質管理

均一な加熱や冷却、異常な熱発生を検出することで、製品の均一性と信頼性を確保します。

  • 焼却炉劣化診断
  • 建物の屋根の空調ムラ
  • 炉の経年劣化監視
  • ソーラーパネル接続箱の監視
  • 製品の温度監視
  • タンク内の温度分布監視
  • ダムの打設監視

業界を問わず様々な用途で利用できます

Related Products

Fully Wireless IoT Camera 
LC Series

LC-EX10

Fully Wireless IoT Camera, Intrinsically Safe Type

LC-EX10Series
Read more

High-sensitivity color camera for still images | Approx. 3-year battery life with 3 captures per day | Intrinsically safe, explosion-proof design (Ex ic IIC T6 Gc, Ex ic IIIC T85 °C Dc) | IP65

  1. Home
  2. Products
  3. LC-T10 Series